• High Light Intensity: Delivers 1200 mW/cm² intensity for efficient polymerization of dental restorative materials.
• Increased Optical Power: Provides up to 50% more optical power compared to previous models.
• Larger Curing Surface: Features a light guide with an 10 mm diameter, offering up to 80% more curing surface area and reducing the number of exposures needed.
• Deeper Curing: Optimized optics ensure a deep, uniform cure from the surface to the cavity bottom, even at clinically relevant distances.
• Improved Depth of Cure: Significantly better depth of cure, even when light positioning is difficult.
• Uniform Light Distribution: Provides better light uniformity and intensity distribution at clinically relevant distances.
• Easy Access: Updated light guide geometry allows easy access to all tooth surfaces.
• Patient Comfort: The angle of the light guide is designed for patient comfort, even with limited mouth-opening abilities.
• Robust and Easy to Disinfect: One-piece, high-quality stainless steel casing is virtually unbreakable and sealed against contamination, making it robust and easy to disinfect.
• Simple Operation: Features two-button operation with one cure mode for all indications.
• Charging Base: Includes a charging base with a built-in light intensity meter and battery charge indicator.

3m Espe Elipar Deepcure S Led Curing LightThe 3M ESPE Elipar DeepCure-S LED Curing Light is a high-performance light-curing unit designed for efficient polymerization of dental restorative materials. It features a powerful LED light source that delivers consistent and uniform light intensity, ensuring reliable curing results.The Elipar DeepCure-S offers a wide light-curing spectrum, making it suitable for a variety of light-curable materials, including composites, cements, and sealants. Its compact and ergonomic design allows for easy handling and access to posterior teeth.The curing light has a large light guide with a 10 mm diameter, providing a broad curing area and reducing the number of exposures needed. It also features a built-in radiometer to monitor the light intensity, ensuring optimal performance.With its advanced features and user-friendly design, the 3M ESPE Elipar DeepCure-S LED Curing Light helps dental professionals achieve efficient and reliable curing results, contributing to the success of their restorative procedures.

• Wavelength: 430–480 nm
• Number of Curing Modes: 6
• Voltage: 110 V - 240 V, 120 V
• Maximum Light Wavelength: 480 nm
• Minimum Light Wavelength: 430 nm
• Light intensity: 1,470 mW/cm2 (-10%/+20%)
• Power supply: Lithium-ion battery Approx. 120 min. battery runtime (~720 10-sec. cures) with constant light output regardless of battery charge
• Operation: Intuitive two-button and single-mode operation Pre-set cure times: 5, 10, 15, and 20 sec. continuous mode (120 sec.) and tack cure mode
• Curing time: Refer to material instructions; 10 sec. for many composites
• Light guide: 10 mm, black coated, autoclavable, optimal intraoral reach due to the user- and patient-friendly geometry.

• 1 x Handpiece (Cordless)
• 1 x Charging Base (230 V)
• 1 x Li-ion Battery Rechargeable
• 1 x 10mm Light Guide
• 1 x  Eye Shield

• Charge the Curing Light: Place the curing light handpiece in the charging base to ensure it is fully charged before use.
• Attach the Light Guide: Securely attach the 10mm diameter light guide to the front of the curing light handpiece.
• Select the Curing Mode: The Elipar DeepCure-S has a single curing mode suitable for all light-curable dental materials.
• Position the Light Guide: Carefully position the light guide as close as possible to the restoration or material to be cured, while ensuring patient comfort.
• Activate the Curing Light: Press the single button on the handpiece to activate the curing light. The light will automatically turn off after the pre-set curing time.
• Observe the Curing Process: Monitor the curing process and ensure the light guide remains in the correct position throughout the exposure.
• Disinfect the Light Guide: After use, remove and disinfect the light guide according to the manufacturer's instructions.
• Charge the Curing Light: Place the handpiece back in the charging base to recharge the battery for the next use.

• Manufacturer/Importer warranty of 12 months as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product

Question) What is the purpose of the Elipar DeepCure-S LED Curing Light?

Answer: The Elipar DeepCure-S is a high-performance light-curing unit designed for efficient polymerization of a variety of dental restorative materials, including composites, cements, and sealants.