• Superior protection against occlusal decay
• Perfect combination of flow and opacity
• Three available shades for versatility
• Easy and precise dispensing
• Efficient moisture control during application
• Fast curing time for increased efficiency

Prevest Denpro PF Seal Pit and Fissure Sealant (20012), a breakthrough in preventive dentistry. This advanced micro filled sealant, with its precise blend of materials, delivers superior protection against occlusal decay. Available in three shades, it seamlessly fills and seals pits and fissures, safeguarding teeth from cavities. Easy to apply and cure, it ensures efficient moisture control and long-lasting results. With meticulous instructions guiding each step, from cleaning to light-curing, it offers practitioners a reliable solution for various dental applications. Prioritizing patient care, it's the trusted choice for sealing fissures early and preserving dental health.

Intended Use:

• Pit & fissure sealing, Enamel surface facing, Orthodontic site covering, Deciduous teeth sealing

• Composition: Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate, Radiopacifiers, Fillers, Curing Agents, Stabilizer
• Application Time: 15 - 20 seconds
• Light-curing Time: 40 seconds per surface
• Compatible Devices: Halogen & LED polymerization devices
• Additional Treatment: Fluoride varnish application

• 2 x Syringe 2g
  
• 10 x Applicator Tips
  
• 1 x Instruction Manual

Preparation:

• Ensure proper isolation of the operating site for effective moisture control.
• Thoroughly clean the surfaces to be sealed using a rotating brush or cleaning paste free of fluorides.
• Etch the enamel with Actino 37% etching gel according to the condition of the enamel, then spray and dry. The etched enamel should appear opaque and matt-white.

Application:

• Remove the protective cap from the syringe and attach a new cannula.
• Apply Prevest Denpro PF Seal Pit and Fissure Sealant from the margin into the fissure or cavity.
• Allow the sealant to penetrate for 15 – 20 seconds, ensuring complete coverage.
• Use the fine cannula to remove any air bubbles.

Light-curing:

• Polymerize the sealant for 40 seconds per surface using a suitable polymerization device.
• Ensure the light output is at least 500mW/cm2 on halogen devices or 300 mW/cm2 on LED devices for optimal curing.

Finishing:

• Re-seal any undercuts and remove excess material cautiously using a finishing diamond.
• Polish the sealed area if necessary with a rubber polisher.

Additional Treatment:

• Apply fluoride varnish on the treated and neighboring teeth to provide additional protection.

• Warranty is not applicable for this product.

Question) What is Prevest Denpro PF Seal used for?

Answer: Prevest Denpro PF Seal is primarily used for filling and sealing pits and fissures on teeth to prevent cavities.