• B type front-loading autoclave with triple Vacuum cycle.
• Friendly operation interface, simple and easy.
• B & D test to check the temperature penetration capacity of the sterilizer and Leak test to monitor whether there is leakage.
• 3 temperature selection : 121⁰ C , 134⁰ C & B+
• Sterilization of unwrapped/wrapped, solid/hollow, porous/non-porous instruments can be done.
• Step button to select a date, month, year and time to store the sterilization cycle.
• 2 separate water tanks available: Distilled water with 3.5litre capacity and waste-water tank with 5litre capacity.
• The cooling condenser in the waste-water tank to reduce the water temperature and prevent deformation of the tank.
• Water quality check sensor in the distilled water tank available.
• An optional Printer is available.
• Double door lock system i.e. airlock & mechanical lock to prevent potential damage.
• B+ cycle in 134⁰ C temperature and sterilization holding time of 18 min for effective sterilization of Implant Kits.

Runyes Medical Instrument Co. Ltd has focussed on Quality management combine with innovative designs of dental equipment. The dental steam sterilizer has the most essential role in the dental clinic for sterilization of dental instruments and prevention of cross-contamination. Runyes has the European Class B standard autoclave with 23L capacity and upgraded features to make this autoclave the most reliable one.

ADVANTAGES:

• B+ cycle for sterilization of implant kit.
• Double door lock system to prevent potential danger caused by incorrect operation.
• Steam Spray barrier to protect the instruments from damage.
• Water filter in the chamber to prevent the drainage pipe from blocking.
• Steam generator cleaning program to increase the efficiency of an autoclave.
• The cooling condenser in the waste-water tank to prevent the tank from deform under heat.
• USB functioning to store sterilization cycles.

•  Voltage - AC - 220 V+/-10%
•  Frequency - 50/60Hz
•  Wire Plug - GB 3 Cores/EN 3 Cores
•  Max HP - 1800 VA
•  Electric Current - 10A
•  Physical Space - 23L
•  Class - Class B Standard
•  Sterilizing Temperature - 121°C, 134°C
•  Dry Procedure - Strong vacuum drying
•  Chamber Size - 249mm*450mm
•  Weight - 50 KG

• 1 x Autoclave
• 1 x Dram
• 1 x Power Cable

Setup:

• Ensure the autoclave is properly connected to a power source according to the specified voltage and frequency.
• Check the water levels in both the distilled water and waste water tanks. Fill or empty them as needed.

Preparation of Instruments:

• Ensure that the instruments to be sterilized are properly cleaned and arranged according to the guidelines provided.

Power On:

• Turn on the autoclave using the designated power switch.

User Interface:

• Use the friendly operation interface to select the desired sterilization cycle, temperature, and any other relevant parameters.

Date and Time Selection:

• If applicable, use the step button to set the date and time for recording sterilization cycles.

Loading Instruments:

• Load the instruments into the autoclave chamber according to the guidelines provided in the user manual. Ensure proper arrangement for effective sterilization.

Close Doors and Initiate Cycle:

• Close both doors securely, engaging the double door lock system.
• Initiate the sterilization cycle as per the selected parameters.

Monitoring:

• Monitor the autoclave during the cycle to ensure it operates without issues. Some autoclaves provide displays or indicators for progress.

Completion:

• Once the sterilization cycle is complete, wait for the autoclave to cool down before opening the doors.

Post-Sterilization:

• Carefully remove sterilized instruments, avoiding contamination.
• Perform any additional steps recommended for the specific autoclave model.

Regular Cleaning:

• Follow the recommended cleaning procedures outlined in the user manual.

Water Tank Maintenance:

• Regularly check and clean the distilled water and waste-water tanks. Refill or empty them as needed.

Safety Tests:

• Periodically perform B & D tests and leak tests as recommended by the manufacturer.

Printer (if applicable):

• If using the optional printer, review and maintain the documentation as needed.

• Manufacturer/Importer warranty of 1 year as applicable for this product.
• (NO WARRANTY on Digital Timer & Element)
• Service and Warranty are handled by the manufacturer/importer directly for this product

Question) What is E 9 error during sterilization process?

Answer: During the sterilization process in the Runyes Feng 23Ltr Class B Front Loading Dental Autoclave, Error Code E9 indicates a possible blockage in the drainage system of the unit. This error suggests that there may be an obstruction preventing proper drainage, and it is essential to check and clear any blockages to ensure the autoclave functions correctly and safely.