• High-quality diamond burs.
• With silicon inside, to hold burs tightly.
• These points are hygienically organized in a Plastic bur block.

The Superendo Crown Preparation Bur Kitis designed to offer speedy, simple, and accurate tooth preparation for a wide range of crown and bridge restorations, veneers, inlays and onlays. Precise depth orientation grooves can be achieved easily with the specially designed depth cutting diamond burs. End-Cutting Burs for shoulder preparation and finishing guide your tooth preparation to perfection. The kit boasts high-quality diamond burs that are securely held in place with silicon. For added convenience, all components are hygienically organized in a plastic bur block, ensuring easy access and maintaining cleanliness during procedures.

• Shank type - Friction grip
• Material - Stainless steel
• Autoclavable upto 134°C
• Package Dimensions : 4.4 x 3.5 x 2.4 inches

Color band on shank:

• Regular - Blue
• Superfine - Yellow

14 Burs in Superendo Crown Preparation Bur Kit

• 101 - Tapered Flat End Diamond Bur
• SF-102R - Tapered Round End Diamond Bur
• SF-265R - Round Inverted Cone/Pear Diamond Bur
• SF-104R - Tapered Ellipse Diamond Bur 
• 201 - Tapered Flat End Diamond Bur
• F414S - End Cutting Diamond Bur (1.2mm diameter)
• F414SS - End Cutting Diamond Bur (1mm diameter)
• 265R - Round Inverted Cone/Pear Diamond Bur
• 104R - Tapered Ellipse Diamond Bur
• SF-201 - Tapered Flat End Diamond Bur
• SF-101 - Tapered Flat End Diamond Bur
• 102R - Tapered Round End Diamond Bur
• 122 - Depth Marker Diamond Bur 
• 148 - Double Cone/Barrel Diamond Bur

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230'000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

This product does not carry any manufacturer/importer warranty.

Question:Are the burs in the SuperEndo Crown Preparation Bur Kit compatible with straight micromotor handpieces?

Answer: No, these burs are not compatible with straight micromotor handpieces. They are specifically designed for use with high-speed airotor handpieces, ensuring optimal performance and effectiveness during crown preparation procedures.

Question:Can it be compatible with all type of airotors?

Answer: Yes, the SuperEndo Crown Preparation Bur Kit is compatible with all types of standard and supertorque head airotors. However, they are not suitable for mini head airotors, which require short shank burs (16mm).