• High-intensity LED light source for efficient and reliable curing of dental materials.
• Lightweight and ergonomic design for comfortable handling and reduced hand fatigue during extended use.
• Digital display for easy monitoring of curing time and power settings.
• The blue light wavelength of approximately 385nm to 515nm to activate photoinitiators and ensure proper material curing.
• User-friendly interface with intuitive controls for convenient operation.
• Durable construction and high-quality materials for long-lasting performance.

Woodpecker O LED Plus Light Cure Unit is a high-quality and efficient curing light designed specifically for dentistry. This advanced dental tool is engineered to expedite the curing process of dental restorative materials, providing dentists with an effective and reliable solution. The Woodpecker O LED Plus Light Cure Unit offers two working modes: High and Norm. The High mode provides two-time settings, 1S and 3S, while the Norm mode offers greater flexibility with time settings of 5S, 10S, 15S, and 20S. This allows dentists to select the appropriate mode and time setting based on the specific requirements of each dental procedure, ensuring optimal results. The device is equipped with a large capacity battery that can be fully charged and used continuously for more than 400 times under the 10s working time mode. This extended battery life provides dentists with reliable and uninterrupted operation during dental procedures, eliminating the need for frequent recharging. The Woodpecker O LED Plus Light Cure Unit operates on the principle of ray radiation, utilizing a high-power LED light source. The wavelength of the curing light is specifically designed to match commonly used dental resin materials, including those from reputable brands such as Waldent, 3M, Dentsply Etc. The emitted light falls within a wide spectrum ranging from 385nm to 515nm. The device is user-friendly, featuring mode and time setting buttons, a power switch, and a countdown display screen. It also includes safety measures such as low power detection and automatic shut-off after 2 minutes of inactivity.

• Adapter Input: AC 100~240V , 50Hz/60Hz
• Output: DC 5V1A
• High power: Blue Light 5W
• Wavelength: 385nm to 515nm
• Size: 268.8mm*26.1 mm*31.8mm
• Intensity High: 2300~2500 MW/cm2
• Intensity Normal: 1000~1200 MW/cm2
• Net Weight: 259g
• Battery Model:  ICR 18490
• Battery capacity: 1400mAh

• 1 x  Main Unit of the LED
• 1 x Light Hood
• 1 x Adapter 
• 1 x Pedestal Charger
• 50 x Disposable Light Cure Sleeves
• 1 x Instruction Manual

• Press the time button to set the solidifying time according to the selected mode.
• High Mode: Choose between 1 second (1S) or 3 seconds (3S).
• Norm Mode: Choose between 5 seconds (5S), 10 seconds (10S), 15 seconds (15S), or 20 seconds (20S).

Operation:

• Position the top of the main unit at the desired area for solidification.
• Press the power button to activate the curing light.
• A "di" sound will indicate the light is working, and the LED will emit blue light.
• The countdown time will be displayed on the screen.
• Once the countdown reaches 0, the work is complete, and the screen will return to the set time.
• To stop the operation at any time, press the power switch button.
• For immediate consecutive use, short-press the button to start the next working cycle.
• Note: If the main unit becomes significantly hot, turn off the device until it cools down. Avoid continuous illumination for more than 10 times.

Low Power and Charging:

• The main unit has a low-power detection circuit.
• When low power is detected, the battery symbol display LED will flash.
• Charge the device promptly by connecting the adapter and placing the main unit into the charging cradle.
• The Charge LED will turn red during charging.
• Ensure a good connection between the main unit and the charging cradle by pressing the buckle firmly.
• Clean the top of the main unit with a clean cloth to maintain light intensity and prevent contamination.

Safety Precautions:

• Always wear a disposable isolation cover before using the machine.
• Aim the light straightly at the resin to ensure proper solidification.
• Use the original light hood provided to protect your eyes from blue light. Avoid direct exposure to eyes.
• Only use the original adapter provided, as other brands may damage the circuit.
• Avoid touching the charging point of the main unit with metal or conductive materials to prevent damage or short circuit.
• Charge the battery in a cool and ventilated environment.
• Do not disassemble the lithium battery, as it may cause circuit short or electrolyte leakage.
• Avoid squeezing, shaking, or short-circuiting the battery. Do not store the battery with metal materials.
• Ensure proper use of the device in accordance with safety classifications and contraindications mentioned in the manual

• Manufacturer/Importer warranty of 12 months as applicable for this product
• Service and Warranty are handled by the manufacturer/importer directly for this product

Question) Head is made up of which material ?

Answer: The head of the Woodpecker O LED Plus Light Cure Unit is made of high-quality plastic polymer, similar to that of the body.